Putting the headset into operation

Pairing the headset with a Bluetooth device

The following chapter describes, by way of example of a mobile phone, how to pair the headset with a Bluetooth device. In case of deviation, proceed as described in the instruction manual of your mobile phone.

1.Switch the headset off (see page 14).

2.Keep the multi-function button pressed until the LED alternately flashes blue and red.

The headset is in pairing mode.

3.Enable the Bluetooth visibility on your mobile phone.

4.Via the mobile phone‘s menu, start the search for new Bluetooth devices (see the instruction manual of your mobile phone). All available devices in the proximity of the mobile phone are displayed.

5.From the found Bluetooth devices, select “Sennheiser MB Pro 1” or “Sennheiser MB Pro 2“ to pair the headset with the mobile phone. If necessary, enter the default PIN code “0000”.

6.Once the headset is paired with the mobile phone, the LED goes off.

1

2

2s

6s

OFF

 

 

”Pairing“

3

4

Menu

Menu

Bluetooth on

Bluetooth o￿

Add device

20 cm

5

6

Sennheiser MB Pro 2

3x

 

Presence

 

Sennheiser MB Pro 2

 

Keyword:

”Pairing successful”

0000

If pairing is not successful within 5 minutes, the headset automatically returns to connectable mode. Repeat the pairing procedure.

12 MB Pro1 MB Pro 2