Sennheiser Freeport, Microphone manual FreePORT systems, Hinweise

The freePORT systems

Designed for different areas of application, the freePORT systems are available in three variants.

yPresentation Set:

This system is ideal for presentation applications. The unobtrusive ME 2 clip-on microphone is virtually invisible.

yInstrument Set:

This system is for connecting musical instruments (e.g. guitar) which have a ¼” (6.3 mm) jack socket directly to the bodypack transmitter.

yVocal Set:

This system is ideal for vocal and speech applications.

Transmitters and receivers of the freePORT systems have four factory- preset frequencies for direct channel selection – ready for immediate use after switch-on.

The freePORT systems are available in three UHF frequency ranges:

yFrequency range A: 719 to 721 MHz

yFrequency range C: 742.5 to 744.5 MHz

yFrequency range E: 863 to 865 MHz

Hinweise:

The Frequency ranges A and C can only be used in certain areas in the EU and must be licensed with the regulating authorities. Fre- quency E is license-free in most EU countries (i.e. ETSI signatory countries).

Please be legal and observe the country-specific regulations of the licensing authorities. Sennheiser are not responsible if you operate illegally.

To avoid interfering with other users, the transmitter should be switched off when not in use.

Features of the freePORT systems:

yUp to four transmission links per frequency range which can be operated simultaneously

yReliable transmission technology

yDiversity technology for minimizing dropouts in the reception

yAdjustable squelch for eliminating RF interference

yRugged housings

yCrystal-clear reception due to dynamic processor

17