Using your RS 185 headphone system
Using the Manual Level Control (MLC) mode
WARNING
Danger due to high volume levels
Before putting on the headphones and before toggling between the level modes, adjust the volume on the headphones to a low level. Toggling between different modes may cause an enormous volume jump that can possibly damage your hearing.
Follow these steps to adjust the signal of your analog audio input.
1Press the LEVEL button on the headphones or on the transmitter until the Manual Level Control (MLC) mode becomes active.
The MLC LED indicator lights up green. If the audio level from your source is too high and exceeds the maximum permitted level, the sound gets distorted and the MLC LED indicator changes to red.
2Use the MLC rotary knob to manually adjust the audio level. If the maximum permitted level is exceeded, turn the knob counterclockwise and position it to the point just before where the MLC LED indicator changes to red. This point means that you have reached the optimum setting for the audio level.
1 |
|
| MLC ON | 2 |
|
|
| LEVEL |
|
| LEVEL |
| ALC MLC |
|
|
|
|
| |
|
|
| EVEL |
|
|
|
|
| |
|
|
| L |
|
|
| OR |
|
|
|
|
| ALC |
|
|
|
| MLC |
|
|
|
|
|
LEVEL
MLC
ALC
|
| MLC |
| MLC | |
|
| |
MIN | MAX |
|
|
| |
|
|
|
MIN MAX
24 RS 185