Troubleshooting

Leaving the range of the transmitter

The range of the transmitter largely depends on environmental conditions such as wall thickness, wall composition etc. If the headphones leave the range of the transmitter, the audio first cuts out occasionally until it finally cuts out completely.

If you re-enter the transmission range within 5 minutes, the connection is automatically re-established.

If you spend more than 5 minutes outside the transmission range, the headphones switch off automatically.

Clearing the pair settings on the headphones

1Press the Volume +/- buttons simultaneously and hold for 2 seconds. The HDR status LED blinks red rapidly.

2Press the HDR power button while continuously holding the Volume +/- buttons. Release all 3 buttons.

The HDR status LED lights up green or red, depending on the battery condition, and starts blinking slowly. The pairing settings on the head- phones are cleared.

1

2

LEVEL

L

R

LEVEL

2s

30 RS 185