Using your RS 195 headphone system
Using your RS 195 headphone system
Switching your wireless headphone system on
WARNING
Danger due to high volume levels!
Listening at high volume levels can lead to permanent hearing defects.
Before putting the headphones on and before toggling between your audio inputs, adjust the volume on the headphones to a low level. Toggling between different inputs may cause an enor- mous volume jumps that can damage your hearing.
Do not expose yourself to high volume levels for long periods of time.
1Switch your audio source on.
If you are using the headphone socket (see page 14) to connect to your
| audio source, adjust the volume of the headphone socket on your audio |
VOLUME | source (e.g. TV) to at least the medium level. |
2Push the AUDIO INPUT SELECTION switch up or down to select your audio source (see page 21).
The status LED 
on the transmitter lights up green.
3Press and hold the HDR power button 
for approx. 2 seconds to switch the headphones on.
The transmitter in standby mode recognizes the active paired head- phones and automatically transmits a signal. The status LEDs on the transmitter and the headphones light up green.
1 | 2 |
ON
Digital
Analog
3
2s
If the headphones are brought outside the transmission range or if there is no audio signal received from the transmitter for more than 5 minutes, the headphones switch off automatically.
20 RS 195