Using the RS 220

Switching the loop through mode on/off

In loop through mode, the signals are looped through from one device to another, even when the transmitter is switched off.

To switch the loop through mode on:

￿Touch the touch key for selecting the audio source E on the trans- mitter until the ANALOG LED B, the COAXIAL LED C and the OPTICAL LED D light up green simultaneously for a moment.

￿Switch the transmitter off. The ON LED Glights up red, the transmitter is in loop through mode.

To switch the loop through mode off:

￿Touch the touch key for selecting the audio source E on the trans- mitter again until the ANALOG LED B, the COAXIAL LED C and the OPTICAL LED D light up green simultaneously.

￿Switch the transmitter off. The ON LED G is off, the transmitter is in standby mode.

B

C

D

E

RS 220 17