Using the RS 220

Switching the transmitter off

￿Briefly touch the Power touch key F. All LEDs go off. The transmitter is

–in standby mode when the ON LED G is off or

–in loop through mode when the ON LED G lights up red.

When the transmitter is switched on the next time, it selects the last set input.

ON

F

To disconnect the transmitter from the mains:

￿Pull out the mains plug from the wall socket.

The transmitter is reset to the factory default settings. Please note that In this case, the headphones’ rechargeable batteries will not be recharged.

18 RS 220