Putting the S1 DIGITAL into operation
Type of use | Type | Operating time |
|
|
|
NoiseGardTM/digital | Alkaline batteries/rechargeable |
|
| batteries | approx. 25 hrs |
| Lithium batteries | approx. 40 hrs |
|
|
|
NoiseGardTM/digital and | Alkaline batteries/rechargeable |
|
Bluetooth technology | batteries | approx. 15 hrs |
| Lithium batteries | approx. 25 hrs |
|
|
|
If the battery capacity is low, the headset automatically switches off to protect the batteries/rechargeable batteries from total discharge and leakage.
Replace the batteries or recharge the rechargeable batteries.
Attaching the belt clip, the cable clip and the design caps
Attaching the belt clip
The belt clip allows you to attach the control unit to the seat belt so that the control unit doesn’t hinder you.
1Slide the belt clip onto the seat belt.
2Snap the control unit into the belt clip. Make sure not to squeeze any connec- tion cable.
1 | 2 |
10 S1 DIGITAL