Sennheiser S1 Switching the headset on/off, Switching the Bluetooth function on/off, OFF, S1 DIGITAL |, supply system, Press and hold the, Using the S1 DIGITAL

Using the S1 DIGITAL

Switching the headset on/off

￿Set the Power OFF/ON switch to the position ON.

ON	NoiseGardTM/digital is switched on. The Power LED lights up, indicating
	the battery charge status or power supply via the on-board DC power
	supply system.
OFF	NoiseGardTM/digital is switched off. The Power LED goes off.
	OFF
	ON

When the S1 DIGITAL, and thus NoiseGardTM/digital, is switched off, it can be used as a conventional, passive headset.

Switching the Bluetooth function on/off

￿Switch the headset on to use the Bluetooth function.

Switching the Bluetooth function on

￿Press and hold the multi-function button until the

LED flashes blue. You hear an ascending beep.

When switching the Bluetooth function on for the first time, the headset will automatically go into pairing mode.

When the headset is already paired with a Bluetooth device, the Bluetooth connection is automatically established. You hear a beep in the headset.

When the headset is already paired with a Bluetooth device but the Bluetooth device is switched off or out of range, the LED flashes blue. The headset will try for 3 minutes to connect to one of the up to 8 previously paired Bluetooth devices. If this fails, the Bluetooth function automatically switches off after 10 minutes.

S1 DIGITAL 17