Sennheiser SD Office HS monaural, SD Office HS, SD Pro1 HS monaural, SD Pro1 HS, SD Pro2 HS binaural, SD Pro2 HS 13

Individually adjusting the headset

Using the SD Office – HS with the headband

1Remove the ear hook by carefully pulling it upwards.

2Replace the name plate with cheek spacer with the basic name plate. This is necessary in order to be able to rotate the headset’s microphone boom (see diagram 4).

3Attach the headset to the headset holder of the headband.

4Rotate the microphone boom and adjust the headset so that the ear pad rests comfortably on your right or left ear.

Left

Right

12 SD Series - User Guide

Contents

DECT Contents “User Guide” Important safety information Page Scope of delivery and overview of the SD series Headsets with components Product overview of the headsets Overview of the SD Pro1/Pro2 – HS headsets SD Pro1 – HS SD Pro2 – HS Overview of the buttons Overview of the LEDs Page Individually adjusting the headset LeftRight Page Page 1.OPEN ”Name Plate Maker“ 2.TYPE 3. PRINT 4. CUT Testing the headset system and the sound quality Page Pairing the headset and the base station “easy pairing” – Pairing the headset and the base station Place the headset into the magnetic holder of the base station Establishing a wireless link Press the Link button on the headset or press the backlit button (either Adjusting the audio signal by means of the dial tone Adjusting the automatic audio transmission “Auto Audio” Making calls using the headset Changing the direction of the volume up/down function On the Audio button, check which direction is assigned “volume down” The Headset LED alternately flashes blue/red Muting the headset’s microphone Press the Audio button If you leave the DECT range 55m Switching between Phone and PC mode Calling via the fixed line phone using the headset Page Calling via the computer using the headset Page Holding a conference call MASTER Charging the headset and storing the headset system Page Switching the headset system off during extended non-use Sharing a workplace Using the headset with a third party base station (DECT-GAPtelephone) Cleaning and maintaining the headset system Replacing the ear pads Replacing the headset’s rechargeable battery Damage to the product due to improper handling Remove the earhook or the headband (see page 4Close the battery compartment 36 | SD Series - User Guide 1Open the battery compartment cover 4Replace the battery compartment cover 2Open the battery compartment 5Replace the battery compartment cover 6Reattach the ear pad to the ear cup by pressing firmly around the ear pad 38 | SD Series - User Guide If a problem occurs Specifications Power supply unit DECT Manufacturer Declarations Sennheiser Communications A/S

Sennheiser manual 13

Models: SD Office HS monaural SD Office HS SD Pro1 HS monaural SD Pro1 HS SD Pro2 HS binaural SD Pro2 HS