Testing the headset system and the sound quality

Pairing the headset and the base station

Upon delivery, the headset and the base station are already paired. You only have to pair the headset with the base station if you have purchased the headset and base station separately or if you want to hold a conference call.

“easy pairing” – Pairing the headset and the base station￿Place the headset into the magnetic holder of the base station.

The Headset LED alternately flashes red and blue. If pairing is suc- cessful, the Headset LED flashes 3 times blue and then lights up contin- uously, indicating that the base station and the headset are paired.

If the Headset LED flashes 3 times red and then goes off, start a new pairing attempt by placing the headset again into the magnetic holder of the base station.

3x

Establishing a wireless link￿Press the Link button on the headset or press the backlit button (either

PC or Phone ) on the base station. The link is established. The Link LED on the base station lights up blue and the Headset LED flashes blue slowly.

Disconnecting a wireless link

￿Press the Link button on the headset or press the backlit button (either

PC or Phone ) on the base station. The link is disconnected. The Link LED on the base station and the Headset LED go off. The headset is in standby mode.

If your telephone has a built-in electronic hook switch supporting the MSH standard, you can only disconnect the wireless link between headset and base station by placing the headset into the base station.

SD Series - User Guide 17