Charging the headset and storing the headset system
You can switch off the headset system (1) or the headset (2) when not using the products for extended periods of time (e.g. when you are on holiday).
Switching the headset system off
1Disconnect the base station from the mains power supply. The base station switches off immediately, the headset switches off about 30 minutes later.
2Press and hold the Link button for 5 seconds to switch off the headset immediately. The Headset LED flashes 3 times red, the headset is switched off completely.
The Link LED on the base station lights up red after a short time, the Charge status LED on the base station goes off.
1
H | e |
A
ads | et |
|
CC
| PC |
DC | IN |
|
2 | SD Office – HS | 2 | SD Pro1 – HS |
| 5s |
| SD Pro2 – HS |
| 3x | 3x | 5s |
|
|
Switching the headset system on and pairing the components
Plug the power supply unit into a wall socket. The base station is switched on.
Place the headset into the magnetic holder of the base station. The Headset LED flashes 3 times blue and then lights up blue. The base station and the headset are paired.
SD Series - User Guide 31