24Troubleshooting
....n\A/c.r On/Off
TV takes an excessively long time to power When powered on, the TV needs time to boot up, just as a com- I
does.
You cannot program the TV to turn on maltic,ally (Timer function).
turned itself off and the light on the front started to blink.
The TV may be locked.
The clock | not be set. |
•Momentary power fluctuation caused the TV to turn off to prevent damage. Power on the TV and wait for the lamp to illuminate.
•If the TV does not stay on, press the POWER button on the control panel for ten seconds to perform System Reset. If this happens frequently, obtain an AC line power condi- tioner/surge protector.
•An unusual digital signal may have been received, triggering a circuit. Power on the TV.
4. | power off. |
|
__ | __ __ __... |
3. | black or gray rectangle on |
4.
6. | stopped VCR, white lines |
| screen. |
Press the POWER button on the control panel for about ten
seconds•. .• to | System . Reset. | _ |
all signals are
location. | ||
and hold the POWER button on the control panel for 1D | ||
cO/'nr,nc to | Reset. |
|
TV'sanalog closed captioning has been set to "text" mode in the Captions menu. Turn off because there is no text informa-
being broadcast.
your VCR'sowner'sguide for further troubleshooting.
| Possible cause: Many VCRs and DVD players |
orCrVldle | |
to | and down. |
•Turn off video mute for the VCR.
•Begin playing the tape.
• | the VCR | to the antenna |
The PerfectColor color balance has been incorrectly set. the PerfectColor balance.
Try using a different HDMI cable.
• If the signal is 1D8Dp, upgrade a Category 1 (unmarked)
' | '_" __~_~_' | ' ,__,. .__,~ H_D...M_I~_c_a,_b_le._..to.. a | .J |
image from a computer appears dis- • Normal TV operation. The TV does not correct distortion in the i
when viewed on the TV.picture from a computer because the correction process may cause the edges of the image to be cut off.
•. __ ... | __._.. | • | .. • | Press MORE | for the FORMAT menu to | dimensions. |
L - |
|
|
|
Downloaded From