Mitsubishi Electronics 153 TV Channels, Troubleshooting, Downloaded From TV-Manual.com Manuals

Troubleshooting 25

TV Channels

Symptom	__	__ __	Remarks
__
: 1. The TV takes several seconds to respond to			•	It is normal for digital channels to take longer to tune in.
i channel changes.			•	Press ENTER after entering a channel number to avoid

delays.

•Use a 4-digit number for an over-the-air digital channel.

•Use a 6-digit number for digital cable channels if your cable

	~~·_·service_			is able to recognize 6-digit channel numbers.				.
	·W_··~	__	·_~_.		.~	._~.	. _ ~
2. You cannot access a channel.	• Use number keys instead of CHANNEL Up/Down.

•Be sure the channel you want to view is in memory.

•Check that the TV is switched to the correct device or the antenna for that channel by pressing the ACTIVITY key.

•Make sure the Lock> Parent menu lock is set to Off.

•If you cannot tune to a virtual digital channel even though the TV has already memorized digital channels, tune to the physical channel number used by the broadcaster. The virtual channel will then be automatically added to memory.

•You may be trying to tune to an analog channel that is no

ChannelView list is displayed, informa- • Program information is displayed only for channels tuned

tion appears incomplete	during the most recent power-on.
•	Available information is sent from the broadcaster or cable
	provider. No other data is available.

1.is no sound even when the volume is turned up.

•Make sure the TV clock is set correctly.

• Press INFO to the for channel.

•Check if the MUTE button is on.

•The TV's"Listen to:" setting may be set to SAP (analog program from the ANT input).

• Check that the Speakers option is set to TV to hear sound from the TV speakers. Sound may be being sent to one of the audio outputs for an AN receiver or headphones.

• If using an AN receiver, check that the Speakers option is set to AV

		Receiver to hear sound from the AN receiver speakers.
		• Press and hold the POWER button on the control panel for 10
		seconds to	Reset.
2.	sound does not match the screen	TV's"Listen to:" setting may be set to SAP (analog program from
		ANT

sound from my AN receiver does match the screen picture (I should

hear the correct audio from my AN receiver).

-".~----"._"

4.Cannot select an audio-only device; it does not appear in the Activity menu.

Downloaded From TV-Manual.com Manuals

Check that DIGITAL AUDIO OUTPUT and/or AVR AUDIO OUTPUT on TV'sback panel is connected to the AN receiver.

Without this connection, devices connected only to the TV (and not the AN receiver) can be heard only from the TV speak- ers. Note that this includes the ANT input, a device (such as a camcorder or MP3 files from a USB drive) connected to the front panel, and any other device sending audio to the TV only.

•Input mode may be selecting unrecognized AV audio input.

Wrong NetCommand settings. See online Owner'sGuide.

+-- "--_.,-""--"-------_....,"._.__..."-----,-~

an unused video plug into the INPUT 3 YIVIDEO jack to activate 1 Input Sensing and make the audio device selectable in the

AC'[IVr[Vmenu.