Using the Set 830 S-MKE system

Using the Set 830 S-MKE system

To switch the Set 830 S-MKE system on, proceed as follows:

Sequence of steps

Page

1. Switch your sound source (e.g. TV) on.

14

The transmitter automatically switches on.

 

 

 

2. Adjust the volume on the receiver to a low

15, 16

level.

 

 

 

3. Switch the receiver on.

15

 

 

4. Adjust the desired volume on the receiver.

16

 

 

Switching the transmitter on/off

To switch the transmitter on:

￿Switch your sound source on.

The transmitter automatically switches on. The opera- tion indicator B lights up green.

If the transmitter doesn’t switch on:

￿Read the chapter “If a problem occurs ...” on page 24.

To switch the transmitter off:

￿Switch your sound source off.

The transmitter automatically switches off after

3 minutes. The operation indicator B

 

goes off.

 

 

To disconnect the transmitter from the mains:

￿Pull out the mains connector from the wall socket.

Note:

When not using the transmitter for extended periods of time (e.g. when you are on holiday), pull out the mains connector from the wall socket. In this case, however, the receiver’s rechargeable battery will not be recharged.

14