Additional technical information

Changing the operating mode

The transmitter can be set to a different operating mode. This is useful when the sound of your sound source is very low and the transmitter therefore does not always switch on automatically.

D

￿ Press the “speech intelligibility” button C

 

for approx. 5 seconds.

C

The indicator D goes off. The charging indicator for the spare rechargeable battery 0 flashes several times:

red: operating mode 2

green: operating mode 1 (factory-preset)

If the operating mode was changed success- fully, the charging indicator for the spare rechargeable battery 0 goes off and the indicator Dlights up again.

0

Particularities of operating mode 2:

In operating mode 2, the transmitter is not switched on by the sound signal from the sound source.

To switch the transmitter on:

￿Take the receiver out of the charging compartment.

To switch the transmitter off:

￿Place the receiver into the charging compartment.

If – in operating mode 2 – you want to use a second receiver and charge its rechargeable battery during operation:

￿ Pull the battery out of the receiver’s battery compartment 6.

￿ Slide the battery into the transmitter’s charging compartment 9as far as it will go.

6

9

29