If a problem occurs ...

You cannot hear anything

 

 

 

Possible cause

Solution

 

Is there a free line

Remove obstacles in the light path

 

of sight between

between receiver and transmitter.

 

receiver and trans-

 

 

mitter?

 

 

 

 

 

Are transmitter and

Avoid exposure to direct sunlight.

 

receiver exposed to

 

 

direct sunlight?

 

 

 

 

 

Is the receiver still

Move the receiver closer to the

 

within the trans-

transmitter. If necessary, switch

 

mitter’s range?

the receiver on again.

 

 

 

 

Are all connectors

Check the connection between the

 

connected correctly?

transmitter and your sound source

 

 

(see page 7).

 

 

 

 

Is the operation

Check if the transmitter is switched

 

indicator B lit?

on (see page 14).

 

 

 

 

Is the transmitter

Set up the transmitter so that the

 

set up the wrong

cables are guided away from the

 

way round?

receiver (see page 6).

 

 

 

 

Does the receiver’s

Wear the receiver the right way

 

Sennheiser logo face

round, with the Sennheiser logo

 

the transmitter?

facing the transmitter.

 

 

 

 

Is the volume of

Set the volume on your sound

 

the sound source

source to a medium level.

 

sufficient?

 

 

 

 

 

Is the volume of the

Increase the volume by turning the

 

receiver sufficient?

volume control 2 of the receiver

 

 

(see page 16).

 

 

 

 

Is the rechargeable

Check if the channel indicator 1

 

battery inserted

is lit. If it is not lit: recharge the

 

properly into the

rechargeable battery (see

 

receiver and fully

page 19).

 

charged?

 

 

Remove the rechargeable battery

 

 

 

 

and reinsert it into the receiver.

 

 

If this doesn’t help: recharge

 

 

the rechargeable battery

 

 

(see page 19).

 

 

 

 

25