Sennheiser SH 330 manual Putting the headset into operation, Connection options

SH_330.book Seite 5 Donnerstag, 10. April 2003 4:25 16

Putting the headset into operation

Connection options

The headset is not directly connected to the telephone but via a telephone-specific adapter cable (accessory). Connection of the headset to the adapter cable is via the “Easy Disconnect” facility.

There are three connection options:

•The adapter cable is connected to the telephone instead of the handset.

•The adapter cable is connected to the telephone in addition to the handset.

•The adapter cable is connected to a Universal Interface (accessory).

Connecting the adapter cable to the telephone’s hand- set socket

Pull the Western plug of the handset cable out of the telephone.

Connect the Western plug of the adapter cable to the handset socket on the telephone until it locks into place. An audible “click” should be heard.

5