Sennheiser SH 330 Connecting the headset to a Universal Interface, The “Easy disconnect” facility

SH_330.book Seite 6 Donnerstag, 10. April 2003 4:25 16

Directly connecting the adapter cable to the telephone

Some telephones feature an additional socket to which you can connect a second handset or a headset. Connect the Western plug of the adapter cable to this socket until it locks into place. An audible “click” should be heard.

Connecting the headset to a Universal Interface

For connecting the headset to a Universal Interface, please refer to the operating instructions of the Universal Interface.

The “Easy disconnect” facility

The headset is connected to the adapter cable via an “Easy Disconnect” facility. During a converation, you can leave your telephone while holding the call by simply disconnecting the headset from the “Easy Disconnect” facility. This allows you to move around freely without having to put off the headset. As soon as you re-connect the two halves of the “Easy Disconnect” facility, you can continue your call.

BTo connect the headset to the “Easy Disconnect” facility, plug in one half of the “Easy Disconnect” facility into the other half until it locks into place. An audible “click” should be heard.

CTo disconnect the headset from the “Easy Disconnect” facility, press one of the two release

buttons . The two halves of the “Easy Disconnect” facility automatically disconnect.

6