Using the bodypack transmitter
Press the SET button.
The lock mode is temporarily deactivated.
How you are using the bodypack transmitter determines how long the lock mode remains deactivated:
When you are in the operating menu
The lock mode remains deactivated until you exit the operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
The lock mode icon flashes prior to the lock mode being activated again.
533.875MHz
ew100 G3 
AF P MUTE 
Muting the audio signal or deactivating the RF signal
The MUTE switch allows you to mute the audio signal or to deactivate the RF signal.
Via the “Mute Mode” menu item, you can set the desired function of the MUTE switch (see page 24):
| Slide the MUTE |
|
Setting | switch ... | Function |
|
|
|
“AF On/Off” | ... to the left | Mutes the audio signal |
| (position MUTE) |
|
| ... to the right | Unmutes the audio |
|
| signal |
|
|
|
“RF On/Off” | ... to the left | Deactivates the RF |
| (position MUTE) | signal |
|
| (offline operation) |
| ... to the right | Activates the RF signal |
|
| (online operation) |
|
|
|
“Disabled” | No function |
|
|
|
|
From the “Mute Mode” menu item, select the desired setting (see page 24).
Exit the operating menu.
Slide the MUTE switch MUTE to the left, to the position MUTE.
The bodypack transmitter reacts as indicated in the table.
13