Adjusting settings via the operating menu
The extended menu “Advanced Menu”
Setting transmission frequencies for the frequency bank “U” – “Tune”
When you have selected one of the system banks and then select the “Tune” menu, the bodypack transmitter automatically switches to channel 1 of the frequency bank “U”. In this case, “U.1” briefly appears on the display panel.
Upon delivery, the channels of the frequency bank “U” are not assigned a transmission frequency.
When you are in the “Tune” menu item, the RF signal is deactivated.
Via the “Tune” menu item, you can set a transmission frequency to be stored in the current channel or you can select a different channel in the frequency bank “U” and assign this channel a transmission frequency.
It is vital to observe the notes on frequency selection on page 26.
Setting a transmission frequency for the current channel
Press the rocker button until the “Tune” menu item appears.
Press the SET button.
The frequency selection appears.
Advanced Menu |
|
| Tune |
|
| Tune | |||||||
Tune |
|
|
|
| 543 | .200 MHz |
|
|
| 544. | 200 | MHz | |
|
|
|
|
|
|
| |||||||
543.200 MHz |
|
|
|
|
| B.Ch: U. 1 |
|
|
| B.Ch: U. 1 | |||
Call up “Tune” |
| Select the MHz |
| Select the kHz | |||||||||
|
|
|
| value and confirm |
| value; store the | |||||||
|
|
|
|
|
|
|
|
|
| setting | |||
|
|
|
|
|
|
|
|
|
|
|
|
| SET |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Stored”
Set the desired frequency.
Press the SET button. Your settings are stored.
You are back to the operating menu.
Selecting a channel and assigning this channel a frequency
Press the rocker button until the “Tune” menu item appears.
Keep the SET button pressed until the channel selection appears.
23