Adjusting settings via the operating menu
If you connect the RMS 1 external mute switch, you can only set the muting via the RMS 1.
The function of the MUTE switch is deactivated during this time.
For information on how to use the MUTE switch, refer to page 13.
Adjusting the transmission power – “RF Power”
| Advanced Menu |
|
|
| RF Power |
|
| RF Power | ||||||
| RF Power |
|
|
|
| Standard |
|
|
|
|
| Low |
| |
|
|
|
|
|
|
|
|
|
|
| ||||
|
| Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Call up |
|
| Select the desired |
| Store the setting | |||||||||
“RF Power” |
|
| setting |
|
|
|
|
|
“Stored”
Via the “RF Power” menu item, you can adjust the transmission power in two steps.
It is vital to observe the notes on the supplied frequency information sheet.
Activating/deactivating the pilot tone transmission – “Pilot Tone”
| Advanced Menu |
|
|
| Pilot Tone |
|
| Pilot Tone | |||||
| Pilot Tone |
|
|
|
| Active |
|
|
|
|
| Inactive |
|
|
|
|
|
|
|
|
|
|
|
| |||
| Active |
|
|
|
|
|
|
|
|
|
|
|
|
Call up |
|
| Select the desired |
| Store the setting | ||||||||
“Pilot Tone” |
|
| setting |
|
|
|
|
|
“Stored”
The bodypack transmitter adds an inaudible signal, known as the pilot tone, to the transmitted signal. The receiver detects and evaluates the pilot tone.
The pilot tone supports the receiver’s squelch function (Squelch) and protects against interference due to RF signals from other devices.
Devices of the ew 300 G1 series (generation 1) do not support the pilot tone function. Therefore, please observe the following when combining a bodypack transmitter or receiver of the ew 300 G3 series (generation 3) with devices from an earlier evolution wireless generation:
Transmitter | Receiver | Make sure to ... |
w G3/ w G2 | w G3/ w G2 | ... activate the pilot |
|
| tone function on both |
|
| bodypack transmitter |
|
| and receiver. |
|
|
|
w G3 | w G1 | ... deactivate the pilot |
|
| tone function on the |
|
| ew 300 G3 bodypack |
|
| transmitter. |
|
|
|
w G1 | w G3 | ... deactivate the pilot |
|
| tone function on the |
|
| ew 300 G3 receiver. |
|
|
|
25