6
Putting the SK 3063-U transmitter into operation

Selecting a microphone

The SK 3063-U transmitter can be used with the Sennheiser
MKE2-4, MKE 102-4 (omni-directional) and MKE 40-4, MKE 10 4-4
(cardioid) clip-on microphones. The power supply of these
microphones is via the microphone input of the transmitter.
Unscrew the coupling ring inorder to unlock the special audio
connector of the microphone.

Attaching and removing the battery pack

For powering the SK3063-U transmitter, you can either use the
B50/B 250 battery pack or the rechargeable BA50/BA 250
accupack.
The display at the front of
the power pack indicates the
charge status of the batteries/
rechargeable batteries.
The transmitter also transmits
the current battery status
information to the receiver
where it is shown on the display
panel.