JVC GR-AXM511 Clock Lithium Battery Insertion/Removal, Switch OFF Power, Remove Battery Holder

10EN

	GETTING STARTED (cont.)
Slot	Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to perform date/time settings.

1

	2
Battery holder	3
	4

SWITCH OFF POWER

Switch off the unit’s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.).

REMOVE BATTERY HOLDER

Pull out the battery holder.

INSERT BATTERY IN HOLDER

Insert the battery in the holder, and be sure to have the “+” mark visible.

RE-INSERT HOLDER

Slide the holder back into the slot until you hear a click.

NOTE:

See “SAFETY PRECAUTIONS” (☞ pg. 2) for information on safe handling of lithium batteries.