Tape remaining time indicator

25MIN MIN

(Now calculating)

120MIN

119MIN

3MIN

2MIN

(Blinking)

1MIN

(Blinking)

0MIN

(Blinking)

Recording Start/Stop Button

DISPLAY Button

EN17

4

 

STOP RECORDING

 

 

 

Press the Recording Start/Stop Button again to stop

 

 

 

recording.

 

 

 

 

 

 

 

 

•The camcorder re-enters the Record-Standby mode.

 

NOTES:

 

When the Power Switch is set to CAMERA and the LCD

 

monitor is opened at an angle of 60 degrees or more, the

 

LCD monitor switches on and the viewfinder switches

 

off automatically to save power.

 

The cassette holder cannot be opened unless a power

 

supply is attached.

 

There may be a delay after you slide EJECT until the

 

holder opens. Do not use force.

 

The tape remaining time is only displayed in the

 

 

viewfinder as shown.

 

The remaining time indicated in the viewfinder is

RECORDING

approximate.

The time required to calculate the remaining tape

 

length, and the accuracy of the calculation, may vary

 

according to the type of tape used.

 

The tape remaining time indicator is correct only if the

 

correct tape length has been selected (pg. 12).

 

“TAPE END” appears when the tape reaches its end, and

 

the power goes off automatically if left in this condition

 

for 5 minutes. “TAPE END” also appears when a cassette

 

whose tape is already at its end is loaded.

 

If the Record–Standby mode continues for 5 minutes

 

without performing Zoom or any other operations, the

 

camcorder’s power shuts off automatically. Set the

 

Power Switch to “POWER OFF”, and then back to

 

“CAMERA” to turn the camcorder on again.

 

If the Recording Start/Stop button is pressed after the

 

Record-Standby mode has continued for over

 

5 minutes, recording may not start immediately.

 

If you are recording on a cassette from the middle (such

 

as when a tape is removed and re-inserted during

 

recording), use the Retake function (pg. 21) to find

 

the end of the last recording so you don’t erase any of it.

 

The LENS COVER warning blinks for about 5 seconds

 

when the camcorder is turned on with the cover closed.

 

While shooting, sound is not heard from the speaker.

 

To turn the tally lamp off during recording, refer to pgs.

 

30 and 32.

 

LCD Monitor/Viewfinder Indications

Press DISPLAY to make the following indications appear/ disappear from the camcorder’s display: cassette warning, tape remaining time, battery pack remaining power indicator and tape length indicator (pg. 53).

1 PRESS DISPLAY BUTTON

To turn off the indications, press DISPLAY for more than 1 second.

Press again for more than 1 second to make the indications reappear.

NOTE:

Even if the indications are off, the tape remaining time appears blinking when the tape is near its end, and the battery pack remaining power indicator appears blinking when the power is almost gone.

Page 17
Image 17
JVC GR-AXM511 manual LCD Monitor/Viewfinder Indications, Stop Recording, Press Display Button

GR-AXM511 specifications

The JVC GR-AXM511 is a versatile camcorder that revolutionizes the way users capture memories. Launched in the late 1990s, this model features a compact and lightweight design that makes it easy to carry, ensuring that spontaneous moments can be captured effortlessly. The camcorder is equipped with a 700x digital zoom lens and a 34x optical zoom, allowing users to zoom in on distant subjects while maintaining image clarity.

One of the standout features of the JVC GR-AXM511 is its advanced image stabilization technology, which significantly reduces the shakiness often associated with handheld recording. This feature is particularly beneficial during dynamic shooting scenarios, such as sports events or while on the move, ensuring that the final footage remains steady and professional-looking.

The GR-AXM511 supports the use of S-VHS-C tapes, which enhances the recording quality by providing better resolution and color reproduction compared to standard VHS tapes. This adaptability to high-quality media makes it an ideal choice for both casual users and budding videographers. The camcorder also features a built-in microphone and supports external microphones, giving users flexibility in audio capture.

Additionally, the model incorporates a 2.5-inch LCD display, making it convenient for users to frame their shots and navigate the camcorder's settings. The intuitive on-screen menu allows for easy access to various functions, such as adjusting exposure and white balance, which helps in achieving the desired look for any recording scenario.

Powering the JVC GR-AXM511 is a rechargeable battery that provides ample recording time, allowing users to capture events without the anxiety of running out of power mid-shoot. This is complemented by its quick-start feature, which ensures that the camcorder is ready to record within seconds when an unexpected moment arises.

Overall, the JVC GR-AXM511 stands out for its combination of portability, image quality, and user-friendly features. Its integration of significant technologies for sound and video recording makes it a noteworthy option for anyone looking to document their life creatively. Whether for home videos or more serious projects, the GR-AXM511 remains a reliable and effective tool for capturing memories.