Sennheiser SKP 30 manual Operation, On/Off, Mute

11 Operation

The SKP 30 plug-on transmitter has been factory-preset to allow immediate use after switch-on. Please note, however, that the transmitter sensitivity is dependent on the application. To avoid overmodulation and distortion, please first check whether the preset sensitivity is suitable for your particular application ( “16 Adjusting the sensitivity (SEnSit)”, page 49).

Attention:

To operate switches or press buttons on your transmitter, do not use any tools such as screw drivers, etc., as this can damage the operating controls.

ON/OFF	Press the ON/OFF button to switch the transmitter on or
	off.
MUTE	Use the MUTE switch to noiselessly mute the audio signal
	without switching off the transmitter.
SET	Press the SET button
	— to select a menu,
	— to change to the next menu,
	— to return to the top menu level.
	Press the UP button
	— to adjust the setting of a menu.
	Press the DOWN button
	— to adjust the setting of a menu.

44