18 Switching the phantom powering on/off (PHAnto)
The SKP 30 transmitter can supply condenser microphones with 48 V phantom powering (P48). Please note: Dynamic microphones can be operated in phantom powering mode without harm. However, if no condenser microphone is being used, you should switch off the phantom powering. With the phantom powering switched on, the operating time of the battery will be reduced to approx. 5 hours.
The phantom powering can be switched on or off via the operating menu:
Select the “PHAnto” menu by pressing the SET button until
“PHAnto” appears on the display; after a short pause the current setting is displayed.
Press the | button to switch the phantom powering on – if you |
press the | button, the phantom powering is switched off. The |
new setting – i.e. “On” or “OFF” – starts flashing on the display.
Press the SET button to return to the top menu level. The display then switches back to the standard display.
51