Sennheiser SKP 30 Battery status indication, step bargraph display, LED lit up, LED flashing

10 Battery status indication

The red LED and the 8-segment bargraph on the display provide information on the (remaining) battery capacity.

3-step bargraph display:

8 segments: the full battery capacity is available,

4 segments: the battery capacity is sufficient,

1 segment: the battery is going flat, immediately replace the battery.

Note:

When switching on the transmitter with a partially used battery, it is possible that all eight segments may show for a short period of time – if this happens, re-check battery status after a few moments.

LED lit up:

The transmitter is switched on and the battery capacity is sufficient.

LED flashing:

The battery is going flat! You should immediately replace the battery!

43