Ameriphone CL-40 Changing the Battery Pack

20

Changing the Battery Pack

The battery pack provides power for the handset of your cordless telephone.

To Replace the Battery Pack:

1. Remove the HANDSET BATTERY COMPARTMENT COVER by pressing the

circular rib on top of the cover and sliding it down.

2. Pull out the battery pack plug and remove the battery pack.

3. Plug the new battery pack into the battery connector.

4. Slide the handset battery compartment cover firmly into place in its closed

position.

5. Before use, charge the new battery pack for 12 hours.

ATTENTION:

The product that you have purchased contains a rechargeable battery pack. The

battery pack is recyclable. At the end of its useful life, under various state and local

laws, it may be illegal to dispose of this battery pack into the municipal waste stream.

Check with your local solid waste officials for details in your area for recycling

options or proper disposal.

Changing the Battery Pack

Remove the HANDSET BATTERY COMPARTMENT COVER by pressing the circular rib on the

top side of the cover then slide it down

Remove the handset battery compartment cover by pressing the circular on

the top side of the cover then silde it down.

MANUAL(430-0102-)V3.p65 02-10-23, 11:3020

Contents

Main Operating Instructions CL Contents IMPORTANT SAFETY INSTRUCTIONS ADDITIONAL SAFETY NOTES FOR CANADIAN USERS 4 SAVE THESE INSTRUCTIONS Battery Cautionary Instructions CAUTION: To reduce the risk of fire or personal injury, read and follow these instructions: ATTENTION: Page HANDSET Controls Page BASE UNIT Controls Getting Started Connecting Your Phone Getting Started (continued) 11 Desk Mounting Desk Mounting FIGURE 1 Wall Mounting Wall Mounting Receiving Calls when the handset is in the base unit Receiving Calls when the handset is NOT IN the Base Unit Automatic Amplifier Setting Page Placing Calls Handset REDIAL Feature Using the Headset Feature Note: Direct Audio Connection To assistive listening device Storing Numbers Recalling Stored Numbers from Memory Security Security Security Code Multi-Channel Access Recharging the Battery Pack Battery Type Recharging the Battery Pack Changing the Battery Pack To Replace the Battery Pack: Changing the Battery Pack Remove the handset battery compartment cover by pressing the circular on the top side of the cover then silde it down. Problem Solving Section Problem Solving Technical Information Noise Range Interference Technical Information Federal Communications Commission Requirements FCC Requirements Federal Communications Commission Requirements (continued)