Cordless Telephone Operation
Placing Calls
1. Press the TALK button. The IN USE LED indicator will light up.
2. Listen for a dial tone.
3. Dial the phone number.
4. When you have finished with your call, press the TALK button again. The IN USE LED indicator will turn off.
Handset REDIAL Feature
1. If you get a busy tone, press the TALK button to hang up.
2. Later, press the TALK button again.
3. Listen for a dial tone.
4. Press the RE/PA button. This will automatically redial the last telephone number you called.
Using the Headset Feature
Your telephone can utilize a headset (not included) to be connected to your HANDSET for you to enjoy a
Insert the small plug on the end of the headset into the HEADSET JACK at the right side of the HANDSET. Follow the procedures discussed in “Receiving Calls”and “Placing Calls”when to receive and place a call.
Note:
When you plug in the headset plug
into the HEADSET JACK it automatically mutes the microphone and speaker of the handset. Unplug the headset to return the handset normal use.
Headsets are available at most retail outlets that sell telephone equipment. The HEADSET JACK is compatible with 2.5 mm headset plugs only.
HEADSET
MICROPHONE
SPEAKER
HEADSET
PLUG (2.5 mm)
HEADSET JACK
15
15 |
