Recharging the Battery Pack

Battery Type

Use the following type and size of battery pack: Cordless Telephone Battery Pack

3.6V, 600mAh Ni-Cd Battery Pack

Recharging the Battery Pack

The nickel cadmium (Ni-Cd) battery pack in the handset can be recharged many times using the built-in charger in the base unit.

When the BATTERY LOW indicator starts to blink, a beepsound will be heard every12 seconds. This indicates that the battery pack needs to be recharged.

Charge the battery pack at least once every 90 days of nonuse to avoid battery failure. When the battery pack can no longer be charged, replacement of the battery pack will be necessary.

The battery pack used in your telephone may develop a condition known as “MEMORY”. Once subjected to a regular short discharging routine, the battery assumes the discharging pattern it was subjected to. This is known as a “MEMORY” condition which causes rapid discharging thereby shortening the battery pack charge span. If you believe your battery pack has developed a memory condition, do not charge the handset until the BATTERY LOW LED indicator comes on. When it does come on, charge the handset fully for 12 hours.

19

MANUAL(430-0102-)V3.p65

19

02-10-23, 11:30

Page 20
Image 20
Ameriphone CL-40 operating instructions Recharging the Battery Pack, Battery Type