AF peak indication SK 300 G2 only | Sennheiser W300 instruction

AF peak indication (SK 300 G2 only)

The yellow LED (AF PEAK) at the front of the SK 300 G2 lights up when the audio input level is excessively high (AF peak) and overmodulates the transmitter. At the same time, the 7-step level display for audio signal “AF” shows full deflection for the duration of the overmodulation.

“PILOT” display

The “PILOT” display lights up when the pilot tone evaluation is activated. (see “Activating/deactivating the pilot tone transmission or pilot tone evaluation“ on page 33).

Display backlighting

After pressing a button, the display remains backlit for approx. 15 seconds.

Page 11

Image 11

Sennheiser W300 manual AF peak indication SK 300 G2 only, Display backlighting

Contents

W300 Thank you for choosing Sennheiser Contents Channel bank system Evolution wireless series ew 300 G2 Delivery includes Safety instructionsSystem variants Areas of application EM 300 G2 rack-mount receiver Overview of operating controls SK 300 G2 bodypack transmitter SKM 300 G2 radiomicrophone Modulation display Transmitter battery status indicationIndications and displays on the receiver Mute display Button backlighting Operation and battery status indicationIndications and displays on the transmitters Diversity display Display backlighting AF peak indication SK 300 G2 only Mounting the receiver feet Connecting the antennasConnecting the mains unit Preparing the components for use Rack adapter and antenna mount Connecting the amplifier/mixing consoleService interface Bottom sides of the receivers Inserting and charging the accupack Connecting the microphone/line cableInserting and replacing the batteries Attaching the bodypack transmitter to clothing Attaching the microphonesPositioning the microphones Changing the microphone head Switching the bodypack transmitter on/off Using the componentsSwitching the components on/off Switching the rack-mount receiver on/off Muting the SKM 300 G2 radiomicrophone Activating/deactivating the lock modeMuting the transmitters Muting the SK 300 G2 bodypack transmitter Overview of menus Operating menuButtons Getting into the operating menu Adjusting a settingStoring a setting Working with the operating menu Exiting the operating menu 01 786.300 MHz Operating menu of the receiverMHz Main Frequency Low High Off Pilot Operating menu of the transmitters Exit Bank Switching between the channels in a channel bank Adjustment tips for the operating menuSwitching between channel banks Releasing locked channels Scanning the channel banks for free channels EM 300 G2 onlyDisplaying the last scan result Starting the scan Multi-channel operation Adjusting the sensitivity transmitters only IMPORTANT! Notes Adjusting the audio output level EM 300 G2 onlyAdjusting the squelch threshold EM 300 G2 only EM 300 G2 rack-mount receiver Selecting the standard display Entering a name Loading the factory-preset default settings Exiting the operating menu Adjusting the contrast of the graphic display EM 300 G2 only Error checklist If problems occur Recommendations and tips For multi-channel operation Care and maintenance HDX noise reduction Wireless transmission systemsAdditional information Field strength-dependent squelch SquelchDiversity reception Pilot tone squelch Receiver SpecificationsSystem Microphone heads Onnector assignmentTransmitters MicrophonesPage Accessories Batteries or rechargeable batteries Warranty regulationsManufacturer declarations CE Declaration Conformity