INTRODUCTION
INTRODUCTION
KEY OPERATION POINTS
•Cutting performance and distribution are best when cutter is level from side to side and front to rear.
•In extra heavy material, rear chains will allow better discharge and better distribution than solid rear bands.
•Never operate the Mower below full PTO speed of 540 or 1000 rpm.
•Corn should be cut at 5 to 6 mph. If full PTO rpm cannot be maintained, use one lower gear.
Operating Noise Level/Sound Pressure
The sound levels at the operator's ear from the attached machine (rotary cutter) are at least 10 dB(A) below the levels from typical Agricultural tractors used to power and transport this machine. Therefore, the Noise emission values given by the OEM of the Agricultural tractor used to power and transport this machine would be valid when this machine is attached to and operated by that Agricultural tractor in all OEM recommended applications.
Warranty information
In addition to the standard Limited Warranty shown on the facing page, Rhino also provides:
1.A
*WARRANTY LIMITATIONS - GEARBOX
A.Warranty is
B.User’s Gearboxes may be rebuilt by Rhino or replaced by new or rebuilt Gearboxes at the option of Rhino.
2.
**WARRANTY LIMITATIONS - DRIVELINE
A. Warranty is
B. Shield Bearings are wearing parts and are not warrantable.
C.
172 02/11 | Introduction Section |
© 2011 Alamo Group Inc.