MAINTENANCE

BLADE REMOVAL

Remove locknut from blade bolt through inspection hole in deck of mower near the gearbox to remove blades for sharpening or replacement. See Figure MntP-R-0022. Always replace nut when replacing blade bolt. When installing blades be sure and check blade bolt pivot diameter for wear. Replace bolt if worn more than 1/4 inch at any point. Tighten lock nut to 300 ft. lbs.

EC72 03/08

Maintenance Section 5-7

© 2008 Alamo Group Inc.

MAINTENANCE

Page 135
Image 135
Servis-Rhino EC72 manual Blade Removal