Servis-Rhino EC72 manual Gearbox Servicing, Tools Needed for Disassembly and Assembly of Gearbox

MAINTENANCE

GEARBOX SERVICING

TOOLS NEEDED FOR DISASSEMBLY AND ASSEMBLY OF GEARBOX

1.Slide Hammer Puller

2.Locktite #5900

3.Punch - Long Drift

4.Needle Nose Pliers

5.Screw Driver

6.External Snap Ring Pliers

7.Socket Wrench

8.9/16 Socket

9.Ball Pin Hammer

10.Pry Bar

Be certain to clamp or securely support the gearbox and sub-assemblies to prevent injuries to hands and feet due to inadvertent dropping or falling over.

Always wear safety glasses and gloves to prevent eye and hand injury when chiseling or hammering on metal components. Hardened metal will chip unexpectedly.

An assembled gearbox is quite heavy. Use a hoist or get help to handle them safely. Lift carefully and properly using your legs to lift - not your back.

NOTICE: Refer to operator’s manual for instructions for proper re-assembly onto the mower deck. Tighten correctly.

EC72 03/08 Maintenance Section 5-9

© 2008 Alamo Group Inc.

MAINTENANCE