Shark MV3010-FS Steam Mode Assembly, The Vac-OR-Steam, is a complete, Changing To Steam Mode

Models: MV3010-FS

1 20
Download 20 pages 27.07 Kb
Page 12
Image 12
Steam Mode: Assembly

Steam Mode: Assembly

The Vac-OR-Steam™, is a complete Always unplug the vacuum from the electrical outlet before changing cleaning nozzles.

Fig. 24

CHANGING TO STEAM MODEASSEMBLY STEAM MODEFILLING THE WATER TANKThe Vac-OR-Steam, is a complete

bare-floor and carpet cleaning system. The steam nozzle also sanitizes bare floors.

Do not use chemicals or detergents in your Vac-OR-Steam. You only need water to achieve super-heated, sanitizing steam.

Fig. 25

Fig. 27

Fig. 28

Fig. 26

CHANGING TO STEAM MODE

1To release the vacuum nozzle and change to the steam nozzle, press the top “nozzle release” button. (Fig. 24) Lift the main body up and the vacuum nozzle will be released. You may need to apply gentle pressure to the nozzle head with your foot to separate the two parts.

ASSEMBLY STEAM MODE

1Place the main unit on top of the steam nozzle and press down to make sure that the steam nozzle is firmly secure to the main body.

(Fig. 25) You will hear an audible click when the two parts are attached correctly.

AVOIDING DECALCIFICATION YOUR STEAM MOP IMPORTANT: Steam nozzle head and multi- purpose steam pad must be attached to the cleaning unit in order to use the steam function.

2Place the multi-purpose steam pad on the floor and position the steam nozzle over it. (Fig. 26)

Manual background IMPORTANT: Make sure the steam nozzle head is well secured to the main body by lifting up on the unit before use.

FILLING THE WATER TANK

1Before use, make sure to fill the water tank. To fill the water into the steam nozzle head, turn the water fill cap counterclockwise to open.

(Fig. 27)

2Use the filling flask and pour water into the tank. (Fig. 28) Do not overfill. Replace the cap on the water tank by turning cap clockwise and tightening.

Manual backgroundQUICK TIP: The steam nozzle head can be filled with water before or after it is attached to the main body of the unit.

Manual background NOTE: If you live in a hard water area, we recommend using distilled water in your Vac- OR-Steam.

AVOIDING DECALCIFICATION YOUR STEAM MOP

Calcium and mineral deposits can build up and impact the performance of your Vac-OR- Steamover time. To extend the life of your product we recommend that you use distilled water.

8

TOLL FREE: 1-800-798-7398

MV3010_40_ENG_IB_120713_2.indd 8

12-07-13 1:36 PM Manual background

Page 12
Image 12
Shark MV3010-FS manual Steam Mode Assembly, The Vac-OR-Steam, is a complete, Changing To Steam Mode, Assembly Steam Mode