Never Over-Fill The Dust Cup, Emptying The Dust Cup

For best results empty the Dust Cup after each use; empty several times during prolonged usage or when it reaches the MAX fill line.

NEVER OVER-FILL THE DUST CUP.

Always unplug the vacuum from the electrical outlet before removing and emptying the dust cup.

Dust Cup

Release

Fig. 11

Fig. 12

1Press the dust cup release button on the top of the unit. Pull the dust cup out of the unit by pulling forward on the handle. (Fig. 11)

2Hold the dust cup over a trash receptacle and press the button at the bottom of the dust cup to empty the dust cup. (Fig. 12)

3Close the bottom trap door and replace the dust cup into the unit.

4To replace the dust cup into the unit, gently push the dust cup assembly down and in. The dust cup will click into place.

CAUTION:

Unplug the vacuum; failure to do so might result in electric shock.

Fig. 13

Fig. 14

Over time the debris may gather in the dust screen of your Vac-OR-Steam™. Clean the dust screen often for optimal suction performance.

1To clean the dust screen, press the top dust cup lid latch to access the dust screen and remove built-up debris as required. (Fig. 13, Fig. 14)

2Place the dust screen back into the unit and close the dust cup lid. You will hear an audible click when the dust cup lid is closed and secure.

3To replace the dust cup into the unit, gently push the dust cup assembly down and in. The dust cup will click into place.

MV3010_40_ENG_IB_120713_2.indd 5

www.sharkclean.com

12-07-13 1:36 PM