Shark S3200 Features Of Your Steam Cleaner, Lightweight & Portable, Care and Maintenance, Water

FEATURES OF YOUR STEAM CLEANER

TIPS ON HOW TO USE YOUR SYSTEM

1.Multipurpose Steam Cleaner: Bathrooms, kitchens, living areas, pet areas and appliances.

Automotive, patio and windows.

2.Lightweight & Portable

3.Steam Pocket™ Wood, vinyl and tile floors

Care and Maintenance

If you consistently use demineralized or distilled water, cleaning the tank is unnecessary.

Rinsing Out the Steam Cleaner

Normally, a periodic rinse of your steam cleaner will free it from deposits. This is recommended every 10-15 tankfulls, to free up any scale deposits from the tank. Fill the boiler halfway with water and shake the cleaner vigorously. Tilt the cleaner upside down to empty the boiler of water and any scale deposits.

Descaling Your Steam Cleaner

Water

•Use tap water for all your cleaning needs.

•However, if you live in an area with hard water, use de-mineralized / distilled water when steaming light colored fabrics to eliminate the possibility of hard water stains.

IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance. Use tap water or distilled/purified water if the tap water in your area is very hard.

Efficient Work

4.Versatile, quick-change accessories

If the tap water in you area contains a high level of calcium deposits and you have been using tap water to do your steam cleaning, you should descale your unit after 10-15 tankfulls.

To Descale the Steam Cleaner

1.Unplug the steam cleaner from the power source before you descale the boiler. Allow the unit to cool completely.

2.Fill the boiler with 1 part vinegar and 5 parts water and leave overnight or for a period of approximately 8 hours. Do not screw the safety/filler cap onto the steam cleaner while you are descaling the boiler. Do not use the steam cleaner while descaling solution is inside the boiler.

3.After the period of soaking is over, turn the steam cleaner upside down to empty the solution from the boiler. Due to the fact that a small amount of solution will be left in the boiler, it is necessary to rinse the boiler out with clean water 2 or 3 times. Your steam cleaner is now ready for use.

•For vertical surfaces, wipe with a towel from the top down, in this way the dirty water will not soil surfaces already cleaned.

•Avoid changing brushes back and forth while cleaning.

•Start with the smallest brush to clean tight spots and corners first.

•Use a towel to wipe dirt as soon as possible, otherwise it will dry and re-adhere to the surface.

4 9