Shark S3250 11 manual Care of Your Light & Easy Steam Mop, After Use And Storage, Cleaning Pad

Care of Your Light & Easy™ Steam Mop

Care of Your Light & Easy™ Steam Mop English

fig. 5

fig. 1

fig.2

AFTER USE AND STORAGE

1When you have finished using the Light & Easy™ Steam Mop, unplug the cord from the outlet and place the mop into the upright position (fig. 1) and let the unit cool 2-3 minutes. Release steam by pumping the handle several times.

2Carefully separate micro-fiber cleaning pad from steam mop, avoiding contact with the hot pocket or dirt. (fig. 2)

3Empty the water tank before storage. Remove the water tank cap and empty the tank over a sink. Replace the water cap.

fig.3

4To store the cooled Shark® Light & Easy™ Steam Mop, hang on a large hook. (fig. 3)

NOTE: If you want to store the Light & Easy™ Steam Mop standing upright, make sure it is leaning against a wall for added support and safety. Always store your Shark® Light & Easy™ Steam Mop with the micro-fiber cleaning pad removed. Store away from children and high traffic areas.

	fig. 6
	CARE OF YOUR MICRO-FIBER	ORDERING REPLACEMENT PARTS
	CLEANING PAD	To order additional parts and
1	Wash pads in warm water. Wash	accessories, feel free to contact us at
	separately from other laundry. Only	www.sharkclean.com or call
	use liquid detergent (no powder	1-800-798-7398.
	detergent). Do not use fabric	NOTE: Some parts may be available
	softeners. Line dry or dry on a low
		at your local retailer.
	dryer setting. (fig. 5)
		Contact EURO-PROcustomer service at
2	If there are loose threads on the
		1 800-798-7398for any other servicing.
	pad carefully cut the threads with
	scissors. Do not pull on them or cut
	at the base. (fig. 6)
	IMPORTANT: The micro-fiber
	cleaning pad may be very hot
	from the steam. Use caution when
	removing. Let the unit cool for 2-3
	minutes.

10 TOLL FREE: 1-800-798-7398

S3250_instructions_100526.indd 10-11

www.sharkclean.com 11

10-05-27 9:58 AM