Shark S3250 11 manual Getting Started, Attaching The Micro-Fiber Pad, Filling The Water Tank

Getting Started

English

Your micro-fiber cleaning pads should be replaced every 3 months to maximize cleaning performance.

fig. 2

fig. 2

fig. 1

fig. 3

ATTACHING THE MICRO-FIBER PAD

1Place the micro-fiber cleaning pad on the floor with the quick fastener strips facing up. Place the Light & Easy™ Steam Mop on the top of the pad to attach. (fig. 1)

IMPORTANT: Only add water to the tank. Chemicals or cleaning solutions may be unsafe or cause damage.

Replacement micro-fiber pads are available at www.sharkclean.com or by calling 1-800-798-7398.

USING THE FRESH BREEZE SCENT To add a light, clean fragrance to the room, use the Fresh Breeze scented pad spray.

1Apply 1-2 mists to the back side (mesh side) of the pad. (fig. 2)

2Apply the pad to the steam pad and mop as usual. The steam will activate the mist leaving you with a fresh fragrance for the room.

IMPORTANT: DO NOT apply to the side of the pad that contacts the floor surface. Not for use on marble floors.

FILLING THE WATER TANK

IMPORTANT: Unplug the Light & Easy™ Steam Mop before filling the water tank with water. (fig. 3)

1Remove the water tank cap by turning it counter-clockwise to the unlocked position. (fig. 4)

2A filling flask and funnel are included with your Light & Easy™ Steam Mop to make filling the water tank easy.

Fill the flask with water and use the funnel to pour it into the tank. Keep the water level under the “MAX” fill line. (fig. 4)

3Replace the water tank cap and turn it clockwise to the locked position.

4 TOLL FREE: 1-800-798-7398

S3250_instructions_100526.indd 4-5

www.sharkclean.com 5

10-05-27 9:58 AM