Shark S3250CW manual Getting Started cont’d, Attaching the MICRO-FIBER PAD, Filling the Water Tank

Getting Started - cont’d

English

Your micro-fiber cleaning pads should be replaced every 3 months to maximize cleaning performance.

fig. 2

fig. 1

fig. 3

ATTACHING THE MICRO-FIBER PAD

1Place the micro-fiber cleaning pad on the floor with the quick fastener strips facing up. Place the Light & Easy™ Steam Mop on the top of the pad to attach. (fig. 1)

IMPORTANT: Only add water to the tank. Chemicals or cleaning solutions may be unsafe or cause damage.

Replacement micro-fiber pads are available at www.sharkclean.com or by calling 1-800-418-0934.

FILLING THE WATER TANK

IMPORTANT: Unplug the Light & Easy™ Steam Mop before filling the water tank with water. (fig. 2)

1Remove the water tank cap by turning it counter-clockwise to the unlocked position. (fig. 3)

2A filling flask and funnel are included with your Light & Easy™ Steam Mop to make filling the water tank easy.

Fill the flask with water and use the funnel to pour it into the tank. Keep the water level under the MAX FILL line. (fig. 3)

3Replace the water tank cap and turn it clockwise to the locked position.

4	TOLL FREE: 1-800-418-0934	www.sharkclean.com	5
S3250CW_11_IB_ENG_100913.indd 4-5		10-09-13	10:57 AM