Shark S3250CW manual Getting Started, Assembly

Getting Started

English

When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you

buy them, so you get a quality Shark® Light & Easy™ Steam Mop.

	c
	b
a
d	f
	e

aUpper Handle Tube with Backsaver benefit

bLower Tube

cSteam Mop Base

d2 All-Purpose Cleaning Pads e Filling Flask

f Funnel

fig. 1

ASSEMBLY

1Remove all the parts from the package. Verify all the listed parts are included.

2Slide the Upper Handle Tube (the tube with the handle) into the Lower Tube (the short tube). Push the two extension tubes together until you hear them click into place. (fig. 1)

fig. 2
3 Insert the assembled handle piece	IMPORTANT: Never use the Light &
into the steam mop base. Push the	Easy™ Steam Mop without attaching
tube base together until you hear a	a micro-fiber cleaning pad to avoid
click. (fig. 2)	damage to your floor and mop.

2	TOLL FREE: 1-800-418-0934	www.sharkclean.com	3
S3250CW_11_IB_ENG_100913.indd 2-3		10-09-13	10:57 AM