Shark S3501CO manual Using Your Carpet Glider, Care of Your Steam Mop, The Carpet Glider

Using Your Carpet Glider

The Steam Mop won’t clean your carpeting or area rugs. However, it’s great for deodorizing and freshening.

1

THE CARPET GLIDER

1The Carpet Glider can be used with the Rectangle head to lightly steam your carpet and area rugs. Just place the mop head on top of the glider and move back and forth across a section of the carpet. The steam mop won’t clean your carpeting or areas rugs, but it’s great for deodorizing and freshening.

NOTE: Please note that the Steam Mop rests on top of the carpet glider and it is not a fixed attachment.

Do not leave steam mop with carpet glider in one stationary position for any period of time.

Care of Your Steam Mop

AFTER USE AND STORAGE

1When you have finished using the steam mop, and your floors are clean, unplug the cord from the outlet and move it into an upright position. Let the unit cool 2-3 minutes and release steam by pumping the handle several times before removing the micro-fiber cleaning pocket from the mop head.

1

2

2Remove the micro-fiber cleaning pocket by releasing the quick fasteners and using the lavender loop on the side of the pocket, avoiding contact with the hot pocket or dirt. Then empty the water tank.

IMPORTANT: Be very careful because the cleaning pockets can get very hot from the steam, so use caution when removing them. Let the unit cool 2-3 minutes.

English

3

3To store the Shark® Steam Mop hanging up; first remove the head (after it has cooled and the steam has been released) then hang on a large hook.

NOTE: If you want to store it standing upright then make sure it’s leaning against a wall for added support and safety. Always store your Steam Mop with the micro-fiber pocket removed, away from children or high traffic areas.

8 TOLL FREE: 1-800-798-7398

www.sharkcompany.com 9