FEATURES
OPERATING INSTRUCTIONS
Your Hand Held Steam Cleaner utilizes pressurized steam to remove tough grease,dirt and grime. Steam is nature’s purest and most powerful cleaner for safely cleaning all hard surfaces in your home without harsh chemicals, thus being perfectly ecological. The appliance has various attachments so that it can be used for many purposes such as:
1.Clean upholstery, sealed grout, bathroom/kitchen tile, stovetops.
2.Easy to clean difficult to reach areas with the angle adapter or concentrator such as faucets, etc.
3.Ideal for windows, mirrors, glass doors, etc.
4.Clean fabrics, window coverings, pillows, bedding etc.
5.Clean hard surface areas such as counters, sinks, shower door tracks, etc.
WARNING: Your Hand Held Steam Cleaner is designed to clean hard surfaces and upholstery that will withstand high heat. Do not use on soft plastics,unsealed wood and cold glass. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. Do not use on unsealed wood. This could cause the wood grain to rise. It is therefore recommended to test an isolated area of the surface to be cleaned before proceeding.
CAUTION: Do not plug in the machine during filling. Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps - Do not use an ordinary extension cord.
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance.
Use regular water or distilled/purified water if the tap water in your area is very hard.
Steam Shut off Safety
Note: This unit must always be used with an accessory to function. The accessory actuates the Steam Shut off Safety for use. Do not try top defeat this Steam Shut Off mechanism.
When attaching or removing hose or concentrator from the main unit, an integrated safety is engaged preventing the user from inadvertently releasing hot steam. Always
release the locking trigger button before removing accessories.
NOTE: There may be a slight release of pressure when accessories are removed. This is normal due to pressure build up inside of accessories during use.
When refilling the water tank, ensure that either the steam concentrator or steam hose is attached to main unit.
To refill, unplug, unit from electrical outlet, depress trigger until all remaining pressure/steam has been allowed to escape from the tank, and allow to cool for 5 minutes. Carefully open the safety cap. Once cool, refill, replace safety cap and
How To Assemble & Use
IMPORTANT: Always insure that the unit is “UNPLUGGED” from the wall receptacle prior to initial filling or
Step 1: Before filling the steam cleaner, make sure that the unit is NOT plugged in.
Step 2: Press locking trigger to ensure all internal pressure is released.
Step 3: Turn Safety Cap counter clockwise until removed.
Step 4: Release locking trigger.
Step 5: Add water using the filling flask provided. Do not overfill. Replace Safety Cap by turning clockwise - press down firmly to tighten. Heating time is approximately 6 minutes. Filling the boiler with hot water will shorten heat up time.
Step 6: Plug the unit into a standard 120 volt grounded wall receptacle. The power “On” light (Red) will light up.
Step 7: Allow approximately 6 minutes for water vapor to reach its working temperature and pressure. When unit is ready for use the red light will change to Green.
Step 8: At the start, some water will come out from the nozzle. This is normal.
NOTE: Disconnect steam cleaner from wall outlet before refilling. It is time to refill your steam cleaner when there is no more steam coming out of the nozzle. Because the water tank is pressurized, use caution when opening to refill. Depress the trigger button while you unscrew the safety cap counterclockwise. Always let unit cool for 5 minutes before refilling the unit with water.
CAUTION: When refilling the appliance while it is still hot, the first drops of water might bubble up.
Using the Locking Trigger Button
The steam cleaner has a locking trigger button. The trigger will lock when you have pushed it all the way. To unlock the trigger, just press down on the trigger release and the trigger will pop up, stopping the flow of steam.
Refilling With Water
Step 1: Disconnect electrical power cord from wall outlet.
Step 2: Press trigger button until all pressure has been released.
Step 3: Allow the unit to cool for approximately 5 minutes before refilling with water.
Carefully unscrew safety cap. Step 4: Slowly pour water using the
filling flask into the boiler.DO NOT Fill Under a faucet, use the filling flask provided. DO NOT OVERFILL. Always leave approximately an inch between the top of the unit and the water level.
Step 5: Release the locking trigger.
Step 6: Screw safety cap back on the appliance and plug appliance back into wall outlet. Steam will start to be produced as before.
WARNING: This appliance is under pressure. After every use, press
trigger button until all
pressure has been released before removing safety cap. Either concentrator nozzle or hose must be connected in order for the trigger to operate. Allow unit to cool for three (3) minutes before refilling.
4 | 5 |
