Shark SE400 manual Care of Your Steam Mop, After USE and Storage

Care of Your Steam Mop

English

fig. 12

fig. 14

fig. 13

AFTER USE AND STORAGE

1When you have finished using the Steam Mop, press either of the Steam Control buttons two times to return the mop to Standby mode. The LED lights will return to flashing BLUE. This stops the unit from steaming. Unplug the cord from the outlet and place the mop into the upright position. Let the unit cool for 2-3 minutes.

Remove the micro-fiber cleaning pad by releasing the quick fasteners and using the lavender loop on the side of the pocket, avoiding contact with the hot pad or dirt. (fig. 12)

SE400_11_IB_E_111003_1.indd 9

2Empty the water tank before storage. Remove the water tank cap and empty the tank over a sink. Replace the water cap. (fig. 13)

3To store the Shark® Pro Lite Steam Pocket® Mop hanging up, first remove the head (after it has cooled and the steam has been released) then hang on a large hook. (fig. 14)

www.sharkclean.com 9

11-10-04 11:35 AM