Shark SE400 manual Getting Started - cont’d

Getting Started - cont’d

fig. 2 fig. 4

fig. 3

fig. 5

2Use the lavender loop on the side of the micro-fiber cleaning pad to slide the mop head into the pad pocket.

Then secure the quick fasteners on the top of the pocket to lock in place. (fig. 2)

3Snap the mop head into the base to secure it. (fig. 3)

4Open the flap on the back of the steam mop. (fig. 4)

Use the filling flask and pour water into the tank. Do not overfill. Close the flap on the water tank. (fig. 5)

IMPORTANT: Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by

the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We recommend that you check the use and care instructions from the floor manufacturer.

NOTE: To prolong the life of your Steam Mop, we recommend using distilled water.

4

TOLL FREE: 1-800-798-7398

SE400_11_IB_E_111003_1.indd 4 11-10-04 11:35 AM