OPERATING INSTRUCTIONS
Throttle |
STEP 7: Turn the engine to "Run" position.
STEP 8: Pull the starter grip. If the engine fails to start after 2 pulls, squeeze the trigger gun to release pres- sure and repeat step. Return starter gently. After the engine warms up enough to run smoothly, move choke to run position and throttle to fast position.
CAUTION: Small engines may kick back. Do not hold pull starter grip tightly in hand.
Temperature
Gauge
Burner
Switch
STEP 8: If hot water is required. Adjust temperature gauge to proper temperature (200°). Turn on Burner switch to begin heating water.
Safety |
Latch |
WARNING! Never replace nozzles without engaging the safety latch on the spray gun trigger.
NOZZLES |
The four
PRESSURE WASHER OPERATOR’S MANUAL
Brass Soap |
| |
Nozzle | Variable Pressure | |
| ||
| Wand (VP) | |
High |
| |
Pressure |
| |
Nozzle |
| |
Variable Pressure | Trigger | |
Control Handle | ||
|
which is provided on the front of the machine.
NOTE: For a more gentle rinse, select the white 40° or green 25° nozzle. To scour the surface, select the yellow 15° or red 0° nozzle. To apply detergent select the black nozzle.
Selection of high or low pressure is accompanied by turning the handle. Note: High pressure nozzle must be inserted at end of wand to obtain high pressure. To apply soap read operator's manual.
9
