Using the Vacuum
IMPORTANT: To protect your carpets, the brushroll will only turn on when you have pulled the handle back towards you and released the Floor Power Nozzle.
3 Power Switch
Settings
OFF
Bare Floors /
Tools
Carpets
4
2
Release suction for easier push and pull on high pile carpets and area rugs.
Suction Release
6
Your Shark® Navigator™ Professional Vacuum can be used to clean bare floors or carpets – with the click of a switch.
Stand the vacuum into the upright position.
Plug in the vacuum.
1Start with the Power Switch in the “O" - Off position.
2Place your foot on the Floor Power Nozzle and pull handle towards you.
3Set the Power Switch to desired cleaning setting.
4Push the power cord into the groove on the handle and then secure the power cord into the cord clip.
5Press the On/Off switch to the“I" position to vacuum bare floors or cleaning with the hose (straight suction only) or to the "II" position to engage the motorized floor brush (for vacuuming carpets and rugs).
6Due to the huge suction power of this vacuum, it may become necessary to adjust the suction release on the hose. If the vacuum is difficult to push or pull or if it is lifting up area rugs, adjust the suction release by opening the valve at the top end of the hose. Close the suction release valve for maximum suction when vacuuming floors or when using the pet hair power brush.
IMPORTANT:
Your Brushroll Indicator Light will illuminate solid green when the brushroll is on, or solid red if there is a blockage. This feature is designed to protect your Lifetime Belt that powers your brushroll.
See Checking for Blockages on page 11.
NOTE: The height of your power nozzle has been optimized
for easy pushing and superior cleaning on all floor types, so there is no need to make any height adjustments as you transition to different floor & carpet types.
6 | TOLL FREE: |
UV420_26_IB_E_120810_3.indd 6