Sharp AF-R80CX, AF-R85CX, AF-S80CX operation manual OFF Timer Operation, When the unit is operating

HOW TO OPERATE

OFF TIMER OPERATION

•This unit has a built-in timer that can be programmed to shut the unit off up to 12 hours in advance. You can set the timer to stop in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance of the stop time, or in 1 hour increments from 10 to 12 hours in advance of the stop time.

•The unit will stop automatically according to your setting.

When the unit is operating

F

hr

COOL / FAN TEMP

SELECTOR	TIMER	ENERGY	POWER
	ON/OFF	SAVER
			ON/OFF

TIMER ON/OFF pad

TIMER indicator

(If you wish to stop the operation 10 hours later, set the delay time as shown above.)

1 Touch the TIMER ON/OFF pad to set the delayed stop time.

•The time setting will change as you touch the pad. The display will change as follows;

Preset(0.5h)

Previous setting 0.5h 1.0h 1.5h 10h

CL(cancel) 12h 11h

•The timer will be set, 5 seconds after the TIMER ON/OFF pad is touched for the last time.

•TIMER indicator will light.

•The time display will count down the remain- ing time.

•The unit will stop when the set time expires. All indicators and displays will go out.

TO CANCEL THE TIMER SETTING

Touch the TIMER ON/OFF pad again after the timer is set or, press the TIMER ON/OFF pad until CL(cancel) appears on the display.

15