Sharp AF-R140DX et0.5h, On Timer Operation, Previoussetting, CLcancel, 1delay d start time, 1.0h

• SELECTOR indicator and TIMER indicator will light.

• The time display will count down the remain- ing time.

• The unit will start when the set time expires. The temperature setting will be displayed.

TO CANCEL THE TIMER SETTING

Touch the TIMER ON/OFF pad again after the timer is set, or press the TIMER ON/OFF pad until CL(cancel) appears on the display.

HOW TO OPERATE

ON TIMER OPERATION

• This unit has a built-in timer that can be programmed to start the unit up to 12 hours in advance. You can set the timer to start in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance

of the start time,	in 1 hour increments from 10 to 12 hours in advance of the start time.
• The unit will start	utomatically according to your setting.

SELECTORindicator		When the unit is not operating
		Touch the TIMER ON/OFF pad to set t e
	F
		1delay d start time.
		• The ime setting will change as you touch t e
	hr	pad. The display will change as follows;
COOLSELECT/ORFANTEMP TIMERON/OFF ENERGSAVERY PON/OFFOWER		et(0.5h)	0.5h	1.0h	.5h		0h
					12h	1	1h
		Previoussetting	CL(cancel)
TIMERTIMERON/OFFindicatorpad
		• The timer will be set, 5 seconds after the
		TIMER ON/OFF pad is touched for the last

time.

(If you wish to start the operation 6 hours and 30 minutes later, set the delay time as shown above.)

NOTES FOR TIMER SETTING AND OPERATION:

•After setting the TIMER, change the temperature and fan speed settings as shown on pages 11 and 12. When the temperature is set in the timer mode, the temperature will show in the display for 5 seconds and then return to the time display.

•The last setting used will be memorized and will appear on the display the next time you operate the unit with the TIMER function.

•If a power failure occurs while the ON or OFF TIMER is set, the TIMER memory will be cancelled and will not resume even after power is reinstated. The unit will not automatically start.

•OFF TIMER OPERATION can also be set with the REMOTE CONTROL.

14